Are your eyebolts installed correctly?

Eyebolts and harness lines are the perfect solution on buildings where access is required for regular maintenance work.

Ideal for a single worker, eyebolts (or i-bolts) reduce the risk of a fall when carrying out work such as window cleaning, facade maintenance or other maintenance operations from an ‘open window’ position, offering effective fall arrest protection.

When used safely, eyebolts can be of great benefit, but we see far too many improperly installed systems which could put lives at risk.

How to properly install eyebolts

Eyebolts should always be positioned in a way that the worker can attach their lanyard and safety harness before they are in an area of risk, ensuring protection in the event of a slip.

In the above picture, the eyebolts have been incorrectly positioned in a way that would hamper their use. This might be obvious to someone with a proper understanding of eyebolts but might not stand out for someone who has little experience with them. Either way, it will make any work carried out less efficient or as a worst case scenario put the worker at risk.

It is also vital that eyebolts are installed in a place that can withstand any force applied. If they are installed in places which are not designed to bear weight, such as bonded brickwork, they can fail.

The relevant code, BS 7883: 2005 Section 8, is very clear on the matter and states that eyebolts fitted into traditional bonded brickwork should only be fitted into load-bearing solid masonry.

The standard states:

8.1.3 Wherever anchor devices are to be used it is essential to ensure that the structure has sufficient strength and stability to support the loads that could be applied to the anchor device in the event of a fall being arrested.  This is especially important in the case of brickwork or combined brickwork/blockwork.

8.1.4 Anchor devices should only be fixed in, or attached to, load-bearing structural members if the strength of these structural members has been assessed and they have been found to be strong enough to support the load that could be applied to the anchor device in the case of a fall being arrested.  Anchor devices should not be fixed in non-load-bearing infill panels without specialist advice being first obtained.

Most people with and understanding of construction will know what load-bearing means, and how it applies to eyebolts, but too often we see this information not being put into practice, or even wilfully ignored.

These installations are at best negligent or at worse criminal, as they could lead to a fatal incident or ruined lives. If you are concerned that eyebolts on your building are unsafe and might be a risk, stop using them immediately and employ a qualified recertification company.

Harcon offers fall arrest inspection as well as providing a wide range of fall arrest equipment, including eyebolts. For more information call 0161 777 4230 or email us.

Safe Rules To Follow When Working At Height


When working at height, it is important to remember the safety measures that you need to keep you safe from possible fall injuries. So, if you are the type of worker who works at height, read the following tips carefully to avoid the risk of falling.

What Measures To Take To Prevent Falling

Determining specific responsibilities for fall prevention management is very important. The workplace should always be safe for every worker although accidents are sometimes impossible to avoid. By implementing the correct safety procedures, injuries can be avoided. To prevent fall injury, always use the safety equipment provided and never take short cuts. Always perform routine checks and tasks.

Certain procedures may vary depending on your job, tasks, site, and duties. Duty holders need to guarantee sufficient information when using equipment and other tools to ensure workers’ safety. The following are the best safety measures to avoid falls in construction sites:

  • Identify every potential fall hazard–whether you are in the demolition, construction, maintenance, or plant structure, knowing the possible reasons for falling is essential. When working on unstable and fragile surfaces, be sure to equip yourself with the right tools needed in performing your duties.
  • Assess situations and risks in which you may fall – if you at the top of the building or roof, there’s always the possibility of falling. The best thing you can do is to evaluate first the site before climbing up the ladder. If you have determined risks, immediately inform the authority so that they can take proper actions as soon as possible. Some of the factors to be considered are the layout, size, and nature of your workplace. Then you can also check the work type, duration, and extent.
  • Implement protective measures and minimize risks–it is always important to consult employees when implementing safety measures in the workplace. Hence, you should be able to understand what is needed to be done and what are the things to be avoided for maximum safety.
  • Provide emergency procedures for immediate response to fall incidents–emergency procedures should be placed within prevention devices area in order to immediately respond to any physical fall emergencies. The procedures should allow employees to be rescued in case they fall from working on height. Fall prevention is a crucial process and must be understood by every worker on the site so that they can also assist with injured co-worker.
  • Make sure that prevention measures and the entire site have enough maintenances services–it is better to ensure that the plant is specifically designed to provide safety working to all employees. It’s not enough to give workers proper tools but also the knowledge during emergency situations.
  • Regularly update safety measures as well as risk assessments in the workplace as per requirements–personnel, tasks, equipment, and conditions may change from various sites but protective measures should always be prioritized.

How to Prevent Tools from Falling

It’s an obvious thing that you are likely to be using tools whilst working at height. You should be familiar with how to operate them and the precautions to take so that if you were to drop, say, a drill, it’s not going to injure someone walking below you on the chance you drop it from an access platform. This can be as simple as tying the tool to your belt with some string but a much better way of doing this is to use a tool lanyard. These are designed to absorb a sudden shock so that you are not pulled over by the downward momentum of some string or rope being pulled taut.

Always safely attach tools in your tool lanyard or belt to quickly get them when you have to use these workplace paraphernalia. You can also put them in a safe spot within the scaffolding so that you will no longer need to climb down and retrieve the necessary gear. Bear in mind that gathering all the materials you need at heights will help you save effort and time during work time.

What Happens If You Do Fall

Prevention is the best cure (think safety barriers), however, there are instances where an accident happens and a fall does occur. Using the correct equipment, a fall can be arrested. Equipment such as lanyards, harnesses and safety lines are perfect for this. However, you still need to identify which equipment to use when you need to go up a certain height and accomplish your given task. For several meters, you may use scaffolding for temporary step or elevating device. This platform will make work easier to manage in a timely fashion.

For higher lifts, you will need a forklift along with a mounting cage and guard railing. Guard rails can be made of cable, steel, pipe, or wood, make sure to use what’s necessary. A safety mesh will support your balance while you’re in the building unit. Using a certain positioning system is also important such as a travel restraint or engineering cable access system. The safety net is for catching platform with safety harness to balance fall.

At work, there is a great possibility to fall from heights and get serious injury. In fact, there are people who have already been killed due to unavailable safety measures provided in the work area. Construction work is a dangerous job especially when you’re required to climb up a certain feet that are above the normal height. So, be sure to get proper protection along with necessary tools to keep you safe and sound.

When you fall, the level of injury will depend on the height of the building you’re in. The higher the more injury you will get or worse, you’ll get killed. With strict guidelines in fall prevention management, employees are guaranteed to be safe no matter where they are. The thing is, you will have to undergo serious training to acquire basic knowledge when it comes to working at heights.

Do not go anywhere unarmed. Always make sure that you have the required equipment to perform any construction work. Your safety is more important than salary so stay vigilant while at work. If you want to know more about the importance of proper safety procedures when working at height, please feel free to contact us and we’ll provide you with other important details. Thanks for visiting and we hope to help you more!

The Advantages Of Using A Self Closing Safety Gate


For any individual, security is the most important thing, especially when working in conditions or in work places that are a bit hazardous and require extreme measures of safety. This is why employers and organisations need to take great measures to increase safety in the workplace to ensure their employees are safe and secure.

Among many tools and techniques used to enhance safety and security, the most prominent one is the self-closing door which is installed at great heights to prevent people from toppling over and from securing a place which is being inspected. This self-closing door is usually made use in factories where there are high end machines kept on a higher plane.

This self-closing door is made using high end material which is extremely durable and sturdy that ensures that employees or individuals don’t topple over. It is made via keeping all the HSE safety measures and regulations in check and works well with roof hatches, barrier systems, ladder access, edge protection and many more.

No matter how much weight is put on it, and no matter how much strength is exerted on it, this self-closing door does not bend, break or twist.

Apart from safety, there are a number of advantages that can be achieved by making use of the self-closing door such as being aesthetically pleasing as opposed to making use of the usual chains and bolts. Using the latter makes the workplace feel like a jail and it is known to decrease the productivity of employees.

Many times individuals forget to close the usual safety measures or doors which lead to serious hazards such as the machinery being damaged or be more prone to harm. By making use of self-closing doors, the machinery and valuable technology is prevented from any external harm that may be inflicted upon these assets.

By being able to close automatically, these self-closing doors prevent any external member from entering the premises and acting as a serious threat to the work place or the machinery that is being protected from outsiders.

Self-closing doors are cost efficient as well. When an individual or an organization makes use of chains and bolts as a solution, they not only are insecure causing accidents on site which the organization has to reimburse, but their prevention from rusting costs a lot. Installing and making use of the self-closing door is a onetime investment. There is no special requirement for cleaning it to keep it rust or dust free.

The most important advantage in using the self-closing door is that it is compliant with the recent security and safety legislatures that require organizations to make use of certain safety measures. Being compliant to a number of legislations keeps the organization on a pedestal among authorities and is prevented from paying huge amounts of fines!

To get the best self-closing door, a number of manufactures can be contacted but such as Kee Gate. They not only deliver the self-closing door but also install it for you!