Single Width Gates
• Standard 1m gate can be cut to size
• Left hand or right hand (install to suit)
• Galvanised or powder coated in safety yellow
• Load tested to 225Kg
• Life cycle tested to BS 6375-2:2009 Clause 6.5 Opening and closing of Gate through 90 degrees 50,000 cycles
• Salt spray tested to ASTM B117 – 11 – 55 Neutral solution over 200 hours
• Spring loaded to automatically close behind the user
• Independently tested to international standards
• Suitable for external and internal applications
• Retro-fits to existing structures such as galvanised handrails, edge protection systems, access platforms and step overs
Kee Gate can be supplied with a range of finishes.
The included components come galvanised to the standard BS EN ISO 1461. Also, the American standard, ASTM A53.
Component Based Systems
Kee Gate is a diverse system comprising of tube-based components.
This gives it a distinct advantage over other products in that it is highly flexible and can be installed with a range of systems as a static and mobile access point.
The use of U-bolt clamps give the product flexibility so that it can be installed against posts, stringer and other structures.
Kee Gate can be mounted to any stringer whether square, round or tubular ranging from 33.7 mm to 48.3mm.
The galvanised standard finish can be powder coated for your application needs to the following standards EN 13438 and USA-AAMA 2603-2605.
Available as part of a full installation or supply only.
Testing & Certification
Tested against the following standards:-
EN ISO 14122:2016
EN 13374 Class A.
Ontario Building Code, NBC and British Columbia Building Code
Canada Occupational Health and Safety
Canadian Standards Association
HSG 33 “Health & Safety in Roof work”
HSE Construction Sheet No. 21 “Working on flat roofs protection against falls.”
Work at Height Regulations.
European Union Directives together with requirements of CDM Regulations. USA & Canada.
LIFE CYCLE TESTING – BS 6375-2:2009 Clause 6.5 – Opening and closing of Gate through 90 degrees.
SALT SPRAY TESTING – ASTM B117 – 11 – 55 over 200 hours to assess performance of coating to resist corrosion.
HSE Views On Edge Protection Access
The HSE cover roof and edge protection in detail in their working at height PDF. In this document they state the following staggering fact:
“Falls account for more deaths and serious injuries in construction than anything else and roofers account for 24%”
They also discuss that adequate edge protection is a must when working on residential and industrial roofs. They go on to state:
“Getting on and off the roof is a major risk. A secure means of entry and exit is essential.”
Our self-closing safety gates are spring loaded for extra safety. This means the gate will shut on its own, once access has been gained. This removes a potential dangerous hazard in that other solutions, such as a bar or chain, introduce the risk of human error in that they may not be reattached after access has been gained.
Our self-closing gate removes the need for this distraction when a user is at height.