Understanding Stainless Steel Guardrails and How They Work

kee-guard-top-fix

It is loved for its high durability and versatility compared to numerous other metals. As such stainless steel is utilized in a vast range of industries for many different purposes. Homeowners have a unique preference for this metal especially when it comes to home improvement tasks. This is mainly because it is easy to maintain as well as sturdy. Besides being used for home improvement projects, stainless steel is also a standard component for fabrication of metal, production of bicycles as well as in the manufacturing of custom cars and ships.

It’s no wonder guardrails are made of stainless steel to offer the required level of protection. Stainless steel guardrails can be installed in different areas such as workstations, pedestrian walkways, and transformer areas. Due to the versatile nature of stainless steels, the guardrails made from this material can be used to protect the building from possible damage, minimise accidents along the roads and also protect equipment against forklift damages.

Stainless steel guardrails are perfect for installation in job sites before work begins. This is in compliance with the requirements of occupational safety and health administration. Apparently, employers or contractors should install guardrail if the job site poses a risk of workers falling six feet and above. In the event that you don’t wish to install guardrails on the job sites, you may resort to alternatives such as fall arrest or restraints systems.

Employers can choose from a wide variety of guardrails. The most common types have been discussed below:

  • Bolt in Rails- The noticeable brackets permit the sections of the post used to slide into the structure after completion of installation. This type of railing is highly accessible.
  • Bolt on rails typically entail the use of hand equipment and drills.
  • W-beam is very common, especially on the roads. Due to the enormity of the role they play, they are usually made from high-quality stainless steel. They are fabricated with steel and other suitable materials to shelter them from the consequences of harsh environmental conditions.

Factors to consider when installing guardrails

First and foremost, the top edge should measure between 39 and 45 inches above the area that your workers get to walk on. Employers must put into account even the tiniest elements such as the footwear of their employees. Remember, the safety of the employees is the top most consideration in this case. It is, therefore, important to take note of the size of the gaps left between the rails. Ideally, they should not be more than 19 inches wide. The last thing that you want is for your workers to slip between the floor and the rails. Lastly, the guardrails should be in a position to accommodate up to 200 pounds of pressure.

What’s involved in the Inspection of a Lifeline System?

Roof Angel

We live in an imperfect world, and it’s normal for things to go wrong. Accidents usually happen. Discussions surrounding the inevitable nature of accidents and injuries in the workplace are always accompanied by arguments that some of these incidents are completely non-preventable. In retrospect, arguments of such nature are in many instances uncalled for. Take for example the case of the occurrence of a manufacturing defect. While this can occur without any prior warning, the failure of equipment is attributed to poor planning or inspection or the lack of it altogether.

The majority of employees understand the importance of inspecting tools, scaffolds, and ladders. However, they prefer securing themselves to lifeline systems without giving it much thought. What most of them fail to appreciate is the fact that horizontal lifelines also need inspections and maintenance. What kind of inspection is done and when?

Appropriateness of the personal protective gear

A fall protection system is among the most critical parts of PPE. A full body harness, a restraint lanyard, anchor points and the connectors are the four most critical areas of the system. Minimal risk is ensured if all the four elements are appropriate to the job at hand and are also fully operational. The entire system could fail if one of the components is inappropriate. Sufficient inspection should be performed to make sure that all the elements of the system can comfortably handle the task being performed.

Proper functioning of the personal protective equipment

It is one thing to ensure that PPE is appropriate and another one to determine its functionality. Appropriateness entails determining if the gear or system is suitable for a given task. Another essential part of the inspection is to check if the components are working properly. This involves inspecting the parts to find out if there are any cuts, breakages or loose nuts and bolts. The functionality of the shock absorber should also be examined as it tends to deteriorate over time. A slight undetected or ignored fault in one of the parts of a lifeline system can mean the difference between saved and lost lives.

Inspections of this nature should be conducted on a regular basis. On average, the inspection of personal protective equipment should be carried out every six months or according to the recommendations of the manufacturers – depending on which one comes sooner. If working in extremely hazardous conditions, the inspection should be done after a minimum of three months. Managers, supervisors, and employees shouldn’t take checks of this nature lightly.

The Importance Of Working At Height Training

1

If you are starting a job that requires you to work at great heights, it may be a smart idea to take some height training courses. It can be hard adjusting to being higher up than you normally are and when you add intricate work on top of that, some people just cannot handle it.

Some people who have been working at great heights for years do not know why it is needed, but the fact of the matter it, if your employees have gone through height training, they are more likely to be safer than those that don’t.

Height training can prepare an employee for just about anything. When a worker knows just what to do, while they are working at such a great height, it can actually keep them from hurting themselves or others.

What they will learn is how to think about the job, and the regulations for the height, at the same time.

Ultimately, this will become second nature to them and allow them to be better and safer workers.

It is also important to the employee because they can constantly be up to date on all things that are happening. For instance in construction, new technologies are always coming out and if they take training courses, they will be able to know how to update certain things to buildings when they need to, while learning at the height they will be working at.

It is more effective than learning on the ground.

Training can also help to put the entire team on the same page. If you have employees that are more experienced than others, by taking them through the height training, it puts everyone on the same level, and when they leave the training, they will all be more aware of certain things that can happen at great heights, and how to deal with them if they do.

Without training, many people could be lost without the proper instruction.

As an employee, it is smart to take height training so you are prepared for anything that could happen. And as an employer, it is a good idea to get your employees in a height training course to make them safer and better employees all around.

When people are well prepared and have the skills to take care of problems, they make for better and more well rounded employees. It will be a positive thing for both the company and the employees that work there.