eyebolts

Home » Products » Height Safety » Safety Eyebolts

Safety Eyebolts

Window cleaning, single unit maintenance or transition points require the minimal level of anchorage as there is no travel required. In these situations Harcon Services can provide you with a wide range of Safety Eyebolts.

Safety Eyebolts positioning should always be determined by a competent person, following the recommendations of BS 7883:1997 clause 8 where appropriate. Our competency ensures that your anchorages are positioned and installed in the perfect position to provide 100% safety through minimised fall risk while ensuring that the user is not hindered by the anchorage.

Our safety eyebolts for use in brick, concrete and masonry have a 16mm diameter unthreaded shank to plug a drilled hole, thus reducing the bending effects which would result in earlier failure during shear loading and available in mild Steel or stainless steel construction.

Supplied, designed and installed to EN795 class A and BS7883 Standards. Never use eyebolts, other than EN 795, as Fall Arrest Anchor Devices the wrong eyebolts in the wrong situation could prove fatal.

Discuss your requirements or technical queries
No Obligation // Expert Service
Call us
We'll call you
0161 777 4230

Traditional Eyebolt

Harcon Services offers a comprehensive selection of Class A1 safety anchors designed to offer you the most effective fall arrest protection for carrying out high level window, fade cleaning or other building maintenance operations from an open window position. This is the standard eyebolt for use in steel, brick, concrete and masonry. Tested and installed to EN 795 and BS 7883.

Removable Eyebolt

Where an eyebolt is not wanted due to aesthetic impact a removable eyebolt can be used. This solution offers an unobtrusive solution to traditional eyebolts in more prestigious buildings.

Temporary Eyebolts

The Saflok Toggle Anchor is a reusable, safe and secure anchorage solution used for horizontal, vertical, or overhead applications. The multipurpose design can be used in steel flanges of varying thicknesses and helps in lowering equipment costs and increasing productivity and job site flexibility.

Contact Us

Discuss your requirements or technical queries
No Obligation // Expert Service
Call us
We'll call you
0161 777 4230

Our Accreditations: